![]() ![]() Internal combustion forklift counterweights are located toward the back of the forklift or on the opposite side of the forks. Check the rating plate on the forklift for this information. Forklifts are designed with maximum carrying capacities using the counterweight for balance, so it is important to know the carrying capacity intended for the forklift. This helps keep the forklift stable during lifting and traveling operations. The counterweight helps offset the weight being lifted by the forklift. It is also important not to remove the backrest before operating the forklift, both for your own safety as well as the well-being of the forklift. The forklift backrest also helps protect the forklift mast and mast components from being damaged by the load.Īlways use a load backrest that is designed for the forklift you are using. The load backrest is attached to the carriage, and it helps prevent the load from slipping backwards toward the forklift operator while the forklift is lifting and traveling. Load BackrestĪ forklift backrest provides the operator another surface to rest the load against. Standard ITA forks are most common, but even those are available in different widths, lengths and shapes. There is a variety of forklift prongs and you can find the right one for your application. The forks are attached to the forklift carriage and carry the load from the bottom. The prongs or forks of a forklift make direct contact with the load being transported. This includes the forks of the forklift, or the forklift tynes or prongs, the load backrest and other features of a forklift truck that are in direct contact with loads. The forklift carriage is used to mount objects that are controlled by the mast. The carriage is a platform located in front of the forklift mast. The difference between the tilt cylinder and the lift cylinder is that it controls the tilt movement of the forklift carriage and the angle of the forks to the ground. The tilt cylinder controls movement for operation of the forklift. A forklift lift cylinder is usually hydraulically powered and a single-acting hydraulic cylinder. The forklift lift cylinder powers the vertical mast movement, or in other words, the raising and lowering of the forklift carriage and forks. By considering these forklift mast options, you can find the best forklift for your job. You will want to consider the mast lift height, the free lift height, the extended lift height and the lowered height. Parts of the forklift mast will be important to understand if you want to select the right forklift for your needs. Triplex: Comes with three mast sections.Forklift masts come with sections that elevate or lower the fork carriage, along with the forks. The forklift mast is located toward the front of the forklift, directly in the line of vision of the operator. What is a mast on a forklift? Forklifts all have a forklift mast that provides the vertical support that allows loads to be raised and lowered. ![]() Here we dive into some forklift terminology, giving you a quick, but comprehensive view of the parts of a forklift. Let’s look at fundamental forklift parts that comprise the anatomy of a forklift. And it makes buying or renting forklifts easier as well. With this information, you can have a better understanding of all the forklift parts and functions, which helps with communicating with coworkers on the job. To assist you, below we have defined many of the parts of a forklift anatomy.įind out what forklift parts you know and familiarize yourself with the other parts. If you use a forklift, it’s helpful to understand forklift terminology. Forklifts operate thanks to many moving parts. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |